Used for horizontal surface applications, most commonly at the slab edge. The three points of support allow accurate installation on an uneven surface and ensure that the anchor load is correctly controlled. The Multi Foot can be through fitted using a variety of anchors appropriate to the base material. The geometry of the Multi Foot ensures safe operation even if the anchor has been misaligned, and the long front foot ensures the minimum edge distance is maintained.
|
|
- Can be used on uneven surfaces
- Very easy and fast to install
- Can be installed with a wide range of attachment alternatives
- Gives a secure moment of
"draw-tight" with adjustable spanner or screwdriver
- Reduces the load on the attachment
- Is protected from concrete by a
Cast-in Tray
|
|
FACTS
Weight: 1.5 kg
Surface treatment: Hot dip galvanised
Patent/Design: Patent Pending / Registered Design
Compliant to: EN 13374 Class A
Art. No: 4290
|
|
| |
The Multi Foot can be fitted to the structural slab before the finishing screed is laid and it is then protected from the poured concrete by the Cast-in Tray. This Cast-in Tray permits a screed of up to 50mm to be poured around the Multi Foot, leaving access for easy removal and even re-use of the Cast-in Tray. Once the Multi Foot has been removed, and the Cast-in Tray pulled out of the screed, the small void can be grouted up. The Multi Foot performance is not affected by use of the Cast-in Tray.
|
|
|
